JDM 1997-2001 TOYOTA 3SGTE 4TH GEN. ST215 (GT-T) ENGINE ONLY.

JDM 1997-2001 TOYOTA 3SGTE 4TH GEN. ST215 (GT-T) ENGINE ONLY.

0 reviews     |     Write a review

  • Brand: TOYOTA
  • Product Code: 3SGTE 4TH GEN. ST215 (GT-T)
  • Availability: In Stock
$1,065.00 Ex Tax: $1,000.00

( SAMPLE PHOTOS ) This is for a used JDM 1997-2001 Toyota 3SGTE 4th generation ST215 Celica / MR2 engine only.

30 DAY WARRANTY

  • 260PS(256HP) @ 6200rpm
  • 324 N·m (239 lb·ft) @ 4400rpm


The fourth-generation engine uses a proprietary CT15B turbocharger. This generation was used in the 1997-2002 ST215 Caldina GT-T AWD Wagon. The exhaust housing is actually cast into the cylinder exhaust manifold, rather than the normal practice of a separate turbine housing after the cylinder exhaust manifold. Due to this, the CT15 is backwards compatible with the third-generation 3S-GTE cylinder head only, not either the first or second generation. Intake charge was cooled by an air-to-air top-mounted intercooler fed through a new side-feed intake manifold. This generation utilizes a coil-on-plug ignition system and 550cc injectors. Boost remains at 13-14psi, however overboost fuel cut is increased to 21psi. Compression is increased to 9:1 and produces 260PS (256 hp) and 324N·m (239 lb-ft).

3S-GTE Specifications

Gen 1Gen 2Gen 3Gen 4Gen 4.5
Capacity1,998 cc (2.0 L)
Bore x Stroke86 mm (3.39 in) x 86 mm (3.39 in)
Variable Performance MechanismT-VISTraditional
IgnitionDistributorCoil-On-Plug
Compression Ratio8.5:18.8:18.5:19.0:19.0:1
Valve MaterialSteel-AlloyHeat-Treated Steel with Nitride
Intake Valve Diameter33.5 mm (1.32 in)
Exhaust Valve Diameter29.0 mm (1.14 in)
Intake Valve Lift7.15mm8.2mm8.7mm8.75mm8.4mm
Exhaust Valve Lift7.15mm8.2mm8.2mm
Injector SizeTop-Feed 430ccSide-Feed 430ccSide-Feed 540ccTop-Feed 540ccExtended length Top-Feed 540cc
Turbo (All Single Turbo)Single-Entry CT26Dual-Entry CT26Dual-Entry "CT20b"Cast-in-manifold Single-Entry CT15B
IntercoolerWTA TMICATA TMIC/SMIC (ST185RC - WTA)WTA TMIC/SMICATA TMIC
Factory Boost8-9 PSI10-11 PSI13 PSI
Fuel Cut12 PSI (ST185RC - 16 PSI)18 PSI21 PSI
Note: HTML is not translated!
Bad           Good
Top